Downloads

Product documentation

Installation

Charger installation manual

English - Download

Deutsch - Downloaden

Nederlands - Download

Français - Télécharger

Pole & Pole Base installation manual

English - Download

Deutsch - Downloaden

Nederlands - Download

Français - Télécharger

Installation video

English - Watch on YouTube

Deutsch - Auf YouTube ansehen

Quick install guide

Peblar charger quick install guide - Download

Load balancing with CT coils quick install guide - Download

Specification sheets

Peblar specification sheet

English - Download

Nederlands - Download

Deutsch - Downloaden

Français - Télécharger

Peblar White Label specification sheet

English - Download

Deutsch - Downloaden

Peblar pole specification sheet

English - Download

Deutsch - Download

Nederlands - Download

Français - Télécharger

Peblar CT coils specification sheet

English - Download

Leaflets

Peblar AC Chargers leaflet

English - Download

Nederlands - Download

Deutsch - Download

Français - Download

Peblar White Label AC Chargers leaflet

English - Download

Deutsch - Downloaden

Media pack

Logo

Peblar logo

 

Download	Download
Download	Download
Download	Download

 

Media

Product images - Peblar Home

Download	Download	Download
Download	Download	Download

 

Product images - Peblar Business

Download	Download	Download
Download	Download	Download

 

Product images - Accessories & Spares

 

Download	Download	Download
Download	Download	Download
Download	Download	Download
Download

 

Brand images

Download	Download	Download
Download	Download	Download

 

 

Software updates

1.7 Release

Latest version

FW 1.7.1 + C1.11 - Download

Release notes:

• Features:
  • Download charging session data
  • Easier local EMS controller detection via OCPP
    
    
• Improvements:
  
  • Improved behavior for ground monitoring error
  • Improved DNS resolving
  • Improved HomeWizard discovery behavior
  • Various connectivity improvements
  • Multiple other improvements

Previous versions

FW 1.7.0 + C1.11 - Download

Release notes:

• OCPP Backoffices updates:
  • Added Blossom, Bywatt, eMabler, Eneco (LAN), Eneco (SIM), Etecnic, Evenli, Laadkompas, LMS (Wurth) REEV, and Scoptvision to the supported backoffice list.
  • Added Heijmans, Van Mossel NL and Van Mossel BE as subselections for E-Flux.
    
    
• Other updates:
  
  • Removed entries indicating (3^rd party SIM), as installers can adjust SIM settings manually during commissioning.
  • Enabled functionality that reduced the possibility of paused charging sessions when dynamic load balancing is applied.

 

FW 1.7.0 + C1.9 - Download

Release notes:

• Backoffice and SIM selection improvement: A dual dropdown list provides a complete and  detailed overview of backoffices in the commissioning interface, making it easier to locate the  correct backoffice during installation. SIM card settings can now be configured during commissioning, providing greater flexibility.
• Danish web interface: The commissioning and web interface is now available in Danish.
• Support for new Modbus meters: Operation of the charger is now supported with additional Modbus meters. This support enables features like solar charging and the household power slider without the need of a smart meter.
  • Carlo Gavazzi EM112/EM3x0 (RTU)
  • Siemens PAC 2200 (TCP)
  • Xemex SSC-1 (TCP)
  • Phoenix Contact EEM-Mxx7x (TCP)
  • Socomec Countis E2x (TCP)
  • Socomec Countis E4x (TCP)
• Resume charging after power outage: The charger now resumes ongoing charging sessions after a power outage.
  
  

1.6 Release

Latest version

FW 1.6.2 + C 1.9 - Download

Release notes:

• Added Groendus, OK, Gridfluxx, EVWAY, ConnectNed to backoffice list
• Adjusted URL FLEXeCHARGE to new production environment

Previous versions

FW 1.6.2 + C 1.8 - Download

Release notes:

• Enabled the household power slider by default for chargers using dynamic load balancing and/or solar charging, except those only using CT coils for measurement
• Various fixes and improvements

FW 1.6.1 + C 1.8 - Download

Release notes:

• Fixed dynamic load balancing with HomeWizard P1 meter not working on a 1-phase household
• Various fixes and improvements

 

FW 1.6.0 + C 1.8 - Download

Release notes:

• Local REST API and Modbus TCP API: These two local API’s can be exposed to use for local control of the charger.
• Group load balancing over Ethernet: Load balancing in a group of chargers can now be performed using Ethernet.
• Household power slider: We introduce a slider that can be used to manage household power consumption.
• Multiple cable (un)lock options for socket models: With this feature, the cable can be permanently fixed to the socket charger. The socket can also be unlocked in the web interface.
• Showing error code on display: The active error code is shown on the display for easier troubleshooting.
• Improved commissioning flow: The commissioning process has been streamlined with additional diagnostics and configurations to incorporate new features.
• UI and UX improvements of the local web interface: Improvements made to the user interface (UI) and user experience (UX) to enhance user-friendliness for the consumer.
• New customisation firmware for Peblar (1.8): This contains the formatting changes for Peblar's web interface (colours, font, etc).
• Phase imbalance support in the commissioning interface: This ensures that the charger is configured in a way that it will not exceed the maximum phase imbalance caused by charging an EV.
• Support of new measurement sources: HomeWizard WiFi kWh meter 1-phase and 3-phase MID supported.
• Multiple improvements: Firmware updates of Peblar chargers prioritize Ethernet and WiFi over LTE, enhanced WiFi connectivity, multiple OCPP improvements.

1.5 Release

Latest version

FW 1.5.1 + C 1.7 - Download

Release notes:

• Various fixes and improvements

Previous versions

FW 1.5.0 + C 1.7 - Download

Release notes:

• New backend support
  • Laadnet
  • Mobiflow

-----------------------------------------------

FW 1.5.0 + C 1.6 - Download

Release notes:

• Improved commissioning flow: We have streamlined the commissioning process to incorporate these new features, ensuring a more straightforward experience for installers.
• Support of new measurement sources: We have expanded our list of supported measurement sources to include the Phoenix EMPro and Xemex Smart Charge Controller, enabling dynamic (group) load balancing capabilities.
• Current limiter: Users can now easily adjust the charging current directly through the web interface, offering greater customization and control.
• Solar charging: Users now have the flexibility to charge with solar generated power, providing greater control over their energy consumption.
• Dynamic group load balancing: By integrating load balancing with the group load balancing feature, we've optimized efficiency by utilizing the measurement source as an input for the leader module within the daisy-chain configuration.
• Improved diagnostics in web interface: We have implemented multiple diagnostic measurements within the web interface, providing users with enhanced insights and troubleshooting capabilities.
• Additional minor features and improvements: This update also includes several smaller enhancements, such as OCPP ClockAlignedDataInterval, CT coils readings via OCPP, the exposure of Eichrecht public key via OCPP, single phase commissioning, and dynamic load balancing improvements.

Declaration of Conformity

Peblar DoC

EU

Download

UK

Download Declaration of Conformity

Download Statement of Compliance

White label DoC

EU

Download

Product certifications

Radio TEC

EU

Download

UK

Download

Metering TEC

EU

Type Examination Certificate - Download

Quality System Approval - Download

UK

Type Examination Certificate - Download

Quality System Approval - Download

Germany

Baumusterprüfbescheinigung - Download

Quality System Approval - Download

OCMF file checker

To download the latest version of the Prodrive Technologies OCMF file checker please press the download button bellow.
Download

How to use the Prodrive Technologies OCMF file checker

1. Add the OCMF measurement data in the dataset text input field

2. Add the Public Key found on the base of the EVSE in the public-key text input field

3. Press the  “verify” button.

4. If the dataset and key pair is valid the following message is displayed:

                "OK: The signature is valid."

   If the dataset and key pair is invalid the following message is displayed:

                "ERROR: The signature is invalid."

Verification of integrity
The tool is code-signed by Prodrive Technologies B.V. to verify the integrity of the software application.

Quality management certifications

ISO9001:2015 - Quality management

Download

ISO13485:2016 - Quality management for medical devices

Download

IATF16949:2016 - Quality management automotive

Download

ISO17025:2017 - Quality management laboratories

Download

ISO14001:2015 - Environmental management

Download

ISO45001:2018 - Occupational health & safety management

Download

ISO27001:2013 - Information security management

Download