EV Fleet Charging Solutions

Explore Peblar for EV fleet charging

Charging a car is easy; charging a fleet is a challenge. Our EV charger is built to keep your vehicles going. The build is robust, the components are few, and thanks to the quick installation time, clean driving is now within eye range.

Key features for EV fleet charging

Peblar fuels both car fleets and van fleets with light commercial vehicles. Whatever the fleet size, we get you up and running in no time.

Future-ready

Peblar chargers are ready for solar and bidirectional charging

Ultra-quick installation

Can be installed by an installer within 30 minutes

Group load balancing

Improves charging management and lowers the risk of grid overload

Safe & secure

Following the highest market standards

Group load balancing

Peblar fleets charging comes with group load balancing. Thanks to this technology, multiple charging stations share a limited amount of power in the most efficient way. Peblar allocates the power across the charging stations based on demand and priority. The result? Better charging management and a lower risk of electrical grid overload.

Explore the features

Peblar for fleets offers everything to keep your vehicles on the road.
Explore the features below.

Features	Peblar Home	Peblar Home Plus	Peblar Business
Number of phases	1 / 3 phase	1 / 3 phase	1 / 3 phase
Maximum power	3.7kW / 11kW	7.4kW / 22kW	7.4kW / 22kW
Port type	Fixed cable 5m / 7.5m	Fixed cable 5m / 7.5m	Socket
Local web interface connectivity	WiFi, Ethernet	WiFi, Ethernet	WiFi, Ethernet
Display
RFID authentication
Group load balancing
Scheduled charging
Energy meter	Indicative	MID	MID / Eichrecht (optional)
Back office connectivity `The back offices we support now are: Blulinc, Chargit, E-flux by Road, FLEXeCHARGE, Laadnet, LMS, Longship, Maxem, Mobiflow, Monta, Optimile, Tap Electric, Wattify.`	OCPP 1.6-J over ethernet, WiFi	OCPP 1.6-J over ethernet, WiFi, mobile network (2G / 4G)	OCPP 1.6-J over ethernet, WiFi, mobile network (2G / 4G)
ISO15118 Plug and Charge ready	-	-

White label EV charger

Would you rather customise your charger? Then go with our white-label option, which offers flexibility in terms of colours, prints and special features. Talk to one of our experts about the options.

Learn more about our white label options

Clean driving - one fleet at a time

Switching an entire fleet to electric driving is a major step towards a greener future. We go the extra mile by keeping our carbon emissions to an absolute minimum. All of our components are produced in-house, and thanks to its robustness, our EV charger will last for many years. This is how we lead the way to clean driving, one fleet at a time.

Highly secure hardware and software

For our team of engineers, robustness doesn’t stop at hardware. It’s everywhere: from the product build to the supporting software.

Hardware

The entire system is integrated into one Printed Circuit Board (PCB). Our chargers have a limited amount of cables and elements, and lack interdependencies. All chargers passed and exceeded the safety tests.

Software

Our chargers meet all safety requirements and regulations. To avoid data leaks, we only allow encrypted web sockets. We use automated, structured processes and test our software on a daily basis.

Frequently Asked Questions

Do you have a question? Find your answer in our FAQ. If you can’t find what you’re looking for, try our support page.

: The light on top of the charger can take on several colours, each indicating the status of the charger.

Solid red: The charger is in recovery mode; a firmware package must be installed on the charger.

Pulsing red: The charger is experiencing an issue that’s resulting in an error which prevents the charger from being used.

Solid yellow: The charger has yet to be commissioned and needs to be set up, or a firmware update is being installed.

Solid blue: The charger is connected to the EV and ready to start the session.

Pulsing blue: The charging session is ongoing, and power is being delivered to the EV.

Solid green: The charger is ready to be used whenever an EV is not connected or an EV is connected but not authorised to charge.

Blinking green: the EV is authorised to charge.

No colour visible: The LED feedback is put at 0%, or the power is down.
: The display of the charger shows multiple things.

1. Charging or discharging
2. Energy / costs of the charging session / total
3. Energy tariff
4. Unit of displayed number, kWh, €, or €/kWh
5. Indication whether displayed energy corresponds to current session or lifetime
: The Peblar charger can be managed by a back office and contains an integrated MID-certified energy meter. This product can be used for billing when you have, for example, a lease car.
: The Peblar charger supports both dynamic load balancing and group load balancing. A later firmware version will also support dynamic group load balancing.
: The Peblar charger can be updated remotely when connected to a back office and thus managed by a charge point operator (CPO).
: Yes, the Peblar charger is compatible with both pole and wall mounting.

EV Fleet Charging

Explore Peblar for EV fleet charging

Key features for EV fleet charging

Group load balancing

Explore the features

White label EV charger

Clean driving - one fleet at a time

Highly secure hardware and software

Hardware

Software

Frequently Asked Questions

Can’t find what you’re looking for?