Téléchargements
Retrouvez tous les documents et ressources utiles pour découvrir, installer et utiliser les bornes Peblar
Peblar Home and Business7 documents
Guide d'installation rapide
PDFEN
Guide rapide, gestion dynamique de la puissance avec tores de mesure
PDFEN
Peblar Dual3 documents
Manuel d'installation Peblar Dual
PDF
Manuel d'utilisation Peblar Dual
PDF
Fiche technique Peblar Dual
PDFEN
Peblar White Label2 documents
Accessoires3 documents
Logiciels et micrologicielsDernière version : Peblar Home and Business 1.10 / c1.16, Peblar Dual 1.10.1
Peblar Home and Business
Firmware 1.10 avec personnalisation c1.16 Dernière version
ZIP1.10 / c1.16
Notes de version
This update brings the Peblar 1.10.0 firmware together with customisation c1.16, which adds new backoffices and updates several existing backoffice presets.
Customisation c1.16
Added backoffices:
- Enlimit
- Flowcharge
- GreenFlux (Private)
- GreenFlux (Public)
- LMS (ESEYE)
- MobilityPlus
- MobilityPlus Proxy
- Plug the Day
- PUMP connect
- SmartLab
- Stekker
- Virta (E.ON Productive-Environment Private)
- Virta (E.ON Productive-Environment Public)
- Virta (E.ON Productive-Environment via Broker Private)
- Virta (E.ON Productive-Environment via Broker Public)
- Zeres (Consumer)
Changes and improvements
- Added support for the Eneco eMobility backoffice, with an updated URL and SIM settings
- Renamed "Eneco (SIM)" to "GreenFlux (Eneco eMobility)"
- Renamed "Mobilitics" to "GreenFlux (Mobilitics)"
- Renamed "Zeres" to "Zeres (Business)"
- Updated the "Plugfuse" URL
- Removed the "Eneco (LAN)", "DKV (Sim)", "DKV (Lan)" and "Interparking" presets
Firmware 1.10.0
This firmware update adds a custom solar strategy, more precise scheduled charging, improved offline behaviour for managed chargers, support for additional Modbus energy meters, and functionality supporting compliance with UK smart charge point requirements.
- Custom solar strategy: tailor solar charging by setting a start and stop power threshold, a grid power target, and an option to keep charging active. This gives more control over self-consumption, grid import and charging availability. Custom solar works like pure solar, with these three settings added on top. OCPP keys: SolarChargingMode (CustomSolar is now an accepted value), SolarChargingCustomerPowerTarget, SolarChargingCustomerPowerThreshold, SolarChargingCustomAlwaysCharge.
- More precise scheduled charging: schedules can now be set in 15-minute intervals, with a separate charging current limit for each block. This allows closer alignment with dynamic tariffs and more granular load management.
- Improved offline behaviour for managed chargers: managed chargers can now be configured to charge before the backoffice has accepted the BootNotification, or before the charger's clock has been validated or synchronised. This makes a charger available sooner during commissioning and maintains service during selected connectivity or time synchronisation issues. Because this affects authorisation and operational control, operators should select the policy that fits their use case. OCPP keys: ChargeBeforeAcceptedPolicy, AllowChargeWithoutValidTime.
- UK smart charging functionality: adds support for the Electric Vehicles (Smart Charge Points) Regulations 2021 for applicable private charge points sold in the UK, including default charging schedules, a configurable randomised delay and tamper detection. An override button in the web interface lets the user bypass the randomised delay and start a session when immediate charging is needed. The ruleset is enabled during commissioning through the web interface, or through the backoffice for managed chargers. OCPP keys: UkSmartChargingRulesetEnable, RandomisedDelay (0 to 1,800 seconds, default 600).
- Extended Modbus meter support: added support for the Inepro N1/Pro1, Inepro N380/P380 and Carlo Gavazzi EM24, giving installers more choice when selecting a compatible energy meter.
Fixes and improvements
- The charge point ID is now shown on the web interface login screen
- Improved socket behaviour, diagnostics and overall stability
Get the most from your hardware and update the charger via the web interface.
Versions précédentes, Peblar Home and Business (18)
Firmware 1.10 avec personnalisation c1.15
ZIP1.10 / c1.15
Notes de version
This firmware update adds a custom solar strategy, more precise scheduled charging, improved offline behaviour for managed chargers, support for additional Modbus energy meters, and functionality supporting compliance with UK smart charge point requirements.
What's new in 1.10.0
- Custom solar strategy: tailor solar charging by setting a start and stop power threshold, a grid power target, and an option to keep charging active. This gives more control over self-consumption, grid import and charging availability. Custom solar works like pure solar, with these three settings added on top. OCPP keys: SolarChargingMode (CustomSolar is now an accepted value), SolarChargingCustomerPowerTarget, SolarChargingCustomerPowerThreshold, SolarChargingCustomAlwaysCharge.
- More precise scheduled charging: schedules can now be set in 15-minute intervals, with a separate charging current limit for each block. This allows closer alignment with dynamic tariffs and more granular load management.
- Improved offline behaviour for managed chargers: managed chargers can now be configured to charge before the backoffice has accepted the BootNotification, or before the charger's clock has been validated or synchronised. This makes a charger available sooner during commissioning and maintains service during selected connectivity or time synchronisation issues. Because this affects authorisation and operational control, operators should select the policy that fits their use case. OCPP keys: ChargeBeforeAcceptedPolicy, AllowChargeWithoutValidTime.
- UK smart charging functionality: adds support for the Electric Vehicles (Smart Charge Points) Regulations 2021 for applicable private charge points sold in the UK, including default charging schedules, a configurable randomised delay and tamper detection. An override button in the web interface lets the user bypass the randomised delay and start a session when immediate charging is needed. The ruleset is enabled during commissioning through the web interface, or through the backoffice for managed chargers. OCPP keys: UkSmartChargingRulesetEnable, RandomisedDelay (0 to 1,800 seconds, default 600).
- Extended Modbus meter support: added support for the Inepro N1/Pro1, Inepro N380/P380 and Carlo Gavazzi EM24, giving installers more choice when selecting a compatible energy meter.
Fixes and improvements
- The charge point ID is now shown on the web interface login screen
- Improved socket behaviour, diagnostics and overall stability
Get the most from your hardware and update the charger via the web interface.
Firmware 1.9.2 avec personnalisation c1.15
ZIP1.9.2 / c1.15
Notes de version
The latest firmware update introduces the fix for socket chargers which have Keep Locked enabled.
Fixes and improvements
- Fixed an issue that prevented socket chargers with Keep Locked enabled from starting a charging session after a restart
Get the most from your hardware and update the charger via the web interface.
Firmware 1.9.1 avec personnalisation c1.15
ZIP1.9.1 / c1.15
Notes de version
Known issue with socket chargers
Users with Keep Locked set to on may experience charging interruptions after updating to firmware 1.9.1. If you have a socket variant and have installed this update, we recommend updating to firmware 1.9.2, which fixes this issue.
What's new in 1.9.1
- Xemex Smart Connect: improved support via direct ethernet connection. Previously, connecting a Xemex Smart Connect via a direct ethernet connection required manually configuring an IP address. This is now handled automatically when Xemex Smart Connect is selected as the measurement source.
Fixes and improvements
- Fixed an issue where a HomeWizard P1 meter connection recovering from a temporary drop-out could get stuck disabled (for example current limited to 16A, or solar limiting removed) until the charger was rebooted
Firmware 1.9.0 avec personnalisation c1.15
ZIP1.9.0 / c1.15
Notes de version
Firmware 1.9.0 is the same as the previous version.
Customisation c1.15
Added backoffices:
- Chargemap (Default)
- Chargemap (Business)
- ChargePilot
- Enjoyelec
- GetLyv
- GreenPoint EV
- Groendus (Coolblue)
- Joulo
- LMS (50five Coolblue)
- Plugchoice
- Powerverse
- Spirii
- Vespr
- YES55
- Zeres
Changes and improvements:
- Updated Virta (Essent) URL
- Renamed Groendus to Groendus (Default)
- Added support for the ChargePilot Controller
Firmware 1.9.0 avec personnalisation c1.14
ZIP1.9.0 / c1.14
Notes de version
Firmware 1.9.0
- Xemex Smart Connect support
- Adjustable Customer ID
- Manual fill-in IP address HomeWizard/Xemex Smart Connect
- Addition of selected Eastron meters
Customisation c1.14
Added backoffices:
- ChargeAngels
- Blue Current
- ClenergyEV
- DKV (SIM)
- DKV (LAN)
- Fuuse
- Laadpaal Totaal
- LichtBlick eMobility
- MaxxEnergy
- Monta (Stroohm)
Changes and improvements:
- Renamed E-flux to E-Flux by Road
- Renamed Monta to Monta (Default)
- Updated all E-Flux URLs to ocpp.road.io/{CPO Name}
- Updated FLEXeCHARGE URL to the new endpoint prod.flexecharge.com/{Site ID}
Firmware 1.8.1 avec personnalisation c1.13
ZIP1.8.1 / c1.13
Notes de version
Firmware 1.8.1
- Various performance updates and small bug fixes
Customisation c1.13
Added backoffices:
- Charge Unix
- ev.energy
- Interparking
- Nexxtmove
- Qovoltis
- Solnet EV
- Swish
- Enables PCard usage for Peblar off-the-shelf products (functionality enabled from release 1.9.0)
Firmware 1.8.1 avec personnalisation c1.12
ZIP1.8.1 / c1.12
Notes de version
Firmware 1.8.1
- Various performance updates and small bug fixes
Customisation c1.12
- Enabled Connect Hub features
- Added multiple backoffices, for the full list see our integrations page
Firmware 1.8.0 avec personnalisation c1.12
ZIP1.8.0 / c1.12
Notes de version
Firmware 1.8.0
- Automatic selection of first-found HomeWizard
- 1- to 3-phase switching for solar charging
- Configurable phase imbalance in group Leader for Germany and Austria
- Local download of charging session data improvements
- 150A CT coil support
- OCPP 1.6 ParentID support
- And more
Customisation c1.12
- Enabled Connect Hub features
- Added multiple backoffices, for the full list see our integrations page
Firmware 1.7.1 avec personnalisation c1.11
ZIP1.7.1 / c1.11
Notes de version
Features
- Download charging session data
- Easier local EMS controller detection via OCPP
Improvements
- Improved behaviour for ground monitoring error
- Improved DNS resolving
- Improved HomeWizard discovery behaviour
- Various connectivity improvements
- Multiple other improvements
Firmware 1.7.0 avec personnalisation c1.11
ZIP1.7.0 / c1.11
Notes de version
OCPP backoffice updates
- Added Blossom, Bywatt, eMabler, Eneco (LAN), Eneco (SIM), Etecnic, Evenli, Laadkompas, LMS (Wurth) REEV and Scoptvision to the supported backoffice list
- Added Heijmans, Van Mossel NL and Van Mossel BE as subselections for E-Flux
Other updates
- Removed entries indicating (3rd party SIM), as installers can adjust SIM settings manually during commissioning
- Enabled functionality that reduced the possibility of paused charging sessions when dynamic load balancing is applied
Firmware 1.7.0 avec personnalisation c1.9
ZIP1.7.0 / c1.9
Notes de version
- Backoffice and SIM selection improvement: a dual dropdown list provides a complete and detailed overview of backoffices in the commissioning interface, making it easier to locate the correct backoffice during installation. SIM card settings can now be configured during commissioning, providing greater flexibility.
- Danish web interface: the commissioning and web interface is now available in Danish.
- Support for new Modbus meters: operation of the charger is now supported with additional Modbus meters. This support enables features like solar charging and the household power slider without the need of a smart meter. Carlo Gavazzi EM112/EM3x0 (RTU), Siemens PAC 2200 (TCP), Phoenix Contact EEM-Mxx7x (TCP), Socomec Countis E2x (TCP), Socomec Countis E4x (TCP).
- Resume charging after power outage: the charger now resumes ongoing charging sessions after a power outage.
Firmware 1.6.2 avec personnalisation c1.9
ZIP1.6.2 / c1.9
Notes de version
- Added Groendus, OK, Gridfluxx, EVWAY, ConnectNed to backoffice list
- Adjusted URL FLEXeCHARGE to new production environment
Firmware 1.6.2 avec personnalisation c1.8
ZIP1.6.2 / c1.8
Notes de version
- Enabled the household power slider by default for chargers using dynamic load balancing and/or solar charging, except those only using CT coils for measurement
- Various fixes and improvements
Firmware 1.6.1 avec personnalisation c1.8
ZIP1.6.1 / c1.8
Notes de version
- Fixed dynamic load balancing with HomeWizard P1 meter not working on a 1-phase household
- Various fixes and improvements
Firmware 1.6.0 avec personnalisation c1.8
ZIP1.6.0 / c1.8
Notes de version
- Local REST API and Modbus TCP API: these two local APIs can be exposed to use for local control of the charger.
- Group load balancing over ethernet: load balancing in a group of chargers can now be performed using ethernet.
- Household power slider: we introduce a slider that can be used to manage household power consumption.
- Multiple cable (un)lock options for socket models: with this feature, the cable can be permanently fixed to the socket charger. The socket can also be unlocked in the web interface.
- Showing error code on display: the active error code is shown on the display for easier troubleshooting.
- Improved commissioning flow: the commissioning process has been streamlined with additional diagnostics and configurations to incorporate new features.
- UI and UX improvements of the local web interface: improvements made to the user interface and user experience to enhance user-friendliness for the consumer.
- New customisation firmware for Peblar (1.8): this contains the formatting changes for the Peblar web interface (colours, font and more).
- Phase imbalance support in the commissioning interface: this ensures that the charger is configured in a way that it will not exceed the maximum phase imbalance caused by charging an EV.
- Support of new measurement sources: HomeWizard WiFi kWh meter 1-phase and 3-phase MID supported.
- Multiple improvements: firmware updates of Peblar chargers prioritise ethernet and WiFi over LTE, enhanced WiFi connectivity, multiple OCPP improvements.
Firmware 1.5.1 avec personnalisation c1.7
ZIP1.5.1 / c1.7
Notes de version
- Various fixes and improvements
Firmware 1.5.0 avec personnalisation c1.7
ZIP1.5.0 / c1.7
Notes de version
New backend support
- Laadnet
- Mobiflow
Firmware 1.5.0 avec personnalisation c1.6
ZIP1.5.0 / c1.6
Notes de version
- Improved commissioning flow: we have streamlined the commissioning process to incorporate these new features, ensuring a more straightforward experience for installers.
- Support of new measurement sources: we have expanded our list of supported measurement sources to include the Phoenix EMPro and Xemex Smart Charge Controller, enabling dynamic (group) load balancing capabilities.
- Current limiter: users can now easily adjust the charging current directly through the web interface, offering greater customisation and control.
- Solar charging: users now have the flexibility to charge with solar generated power, providing greater control over their energy consumption.
- Dynamic group load balancing: by integrating load balancing with the group load balancing feature, we have optimised efficiency by utilising the measurement source as an input for the leader module within the daisy-chain configuration.
- Improved diagnostics in web interface: we have implemented multiple diagnostic measurements within the web interface, providing users with enhanced insights and troubleshooting capabilities.
- Additional minor features and improvements: this update also includes several smaller enhancements, such as OCPP ClockAlignedDataInterval, CT coils readings via OCPP, the exposure of Eichrecht public key via OCPP, single phase commissioning, and dynamic load balancing improvements.
Peblar Dual
Firmware 1.10.1 pour Peblar Dual Dernière version
SWU1.10.1nov. 2026
Uniquement pour Peblar Dual. Ne pas installer sur Peblar Home ou Business.
Notes de version
Firmware 1.10.1 is the first field release for Peblar Dual. It adds the features specific to Dual, such as custom logos, dynamic QR code payment, automatic phase rotation, RCD-A support and two-socket operation. These notes focus on what differs from or extends the single socket experience. Update the charger through Connect Hub or the web interface.
What is new for Peblar Dual
- Two-socket operation and internal load distribution: Dual manages two sockets in one charge point and distributes the available current across both connectors, within the configured limit.
- Group load balancing: done at charger level. Available power is shared dynamically between the two connectors, and their combined consumption stays within the limit of the configured measurement source.
- Automatic phase rotation: for single-phase vehicles, Dual can assign charging to phase L1, L2 or L3 and rotate the connection after the vehicle is connected to improve the distribution across sockets.
- On-screen language selection: drivers can choose their language on the display. Supported languages are English, Dutch, French, German and Danish.
- Built-in RCD-A with on-screen reset: if the RCD-A trips and no failure blocks a reset, anyone can reset it from a prompt on the touchscreen.
- Custom logo on the display: host a PNG file of up to 100 kB at a URL the charger can reach and set CustomLogoUrl. The charger then downloads and shows the logo.
- Contact details on screen: show support contact information on the information page and when the charger enters a system-level fault. Set it with the ContactDetail key.
- QR-based ad hoc charging: set QRPaymentURLTemplate to show a dynamic QR code that opens a web-based charging start flow. TOTP is supported for security, with the keys TOTPSharedSecret, TOTPLength and TOTPValidityTime.
- Scheduled charging: configured for the whole Dual instead of per socket, so time-block current limits apply at charger level.
- Solar charging: the built-in strategy is meant for one site with one Dual and local solar generation. It cannot be combined with group load balancing. Larger multi-charger solar sites need an external energy management solution.
- Ethernet daisy chain: Dual has an embedded switch with two external network ports, so network cables can be daisy-chained without an external switch.
Connectivity, security and fixes
- WebSocket compression: supports the OCPP 1.6 permessage-deflate extension (RFC 7692). When the backend supports it and WebSocketCompressionEnable is on, OCPP traffic can be reduced by up to 80%.
- The charge point ID is now shown on the web interface login screen.
- Improved socket behaviour, diagnostics and overall stability, plus minor security updates.
Not yet available in this release
- Modbus APIs: options may be visible, but the API is not fully implemented yet.
- Custom logo upload through the web interface: use CustomLogoUrl for now.
- Dynamic load balancing (BOP): not implemented yet. For a single Dual, group load balancing gives comparable control across its two connectors.
- Optimised group load balancing: phase rotation happens locally at charger level, leader-directed phase selection per socket is not available yet.
- Wi-Fi mesh networking: not available yet.
Mettez à jour la borne via son interface web. Besoin d'aide ? Consultez les mises à jour du firmware dans le Help Center.
Certifications23 documents
Déclarations de conformité
Déclaration de conformité Peblar Home et Business
PDFR26EU
Déclaration de conformité Peblar Dual
PDFR02EU
Déclaration de conformité britannique
PDFR09UK
Attestation de conformité britannique
PDFR03UK
Déclaration de conformité des bornes AC White Label
PDFR26EU
Équipements radioélectriques
Certificat RED, articles 3.1 et 3.2
PDFEU
Certificat RED, articles 3.3 d et e
PDFEU
Certificat britannique des équipements radioélectriques
PDFUK
Comptage de l'énergie
Certificat d'examen de type Peblar Dual (Baumusterprüfbescheinigung)
PDFR0DE
MessEG Anforderungen für CPO's und eMSP's
PDFR01DE
Certificat d'examen de type Peblar Dual
PDFEU
Certificat d'examen de type (Baumusterprüfbescheinigung)
PDFR4DE
Vérificateur de fichiers OCMF
Outil WindowsDE
Système de management
ISO 9001:2015
PDF
ISO 13485:2016
PDF
IATF 16949:2016
PDF
ISO 14001:2015
PDF
ISO 45001:2018
PDF
ISO 27001:2022
PDF
ISO 22301:2019
PDF
ISO 17025:2017
Web
Kit média8 téléchargements
Logos
Pack de logos Peblar
ZIP
Photos produits
Photos de la borne Peblar Dual
ZIP
Visuels 3D des bornes Peblar Home et Business, versions avec câble attaché
ZIP
Visuels 3D des bornes Peblar Home et Business, versions avec prise T2S
ZIP
Visuels 3D des produits
Visuels 3D de la borne Peblar Dual
ZIP
Accessoires et pièces détachées
Accessoires Peblar Dual
ZIP
Accessoires et pièces détachées
ZIP
Visuels de marque
Banque d'images Peblar
ZIP
Merci de respecter la charte graphique Peblar lors de l'utilisation des logos et visuels.
Aucun document ne correspond à votre recherche. Essayez un autre mot ou contactez le support ci-dessous.
Vous ne trouvez pas le document recherché ?
Notre équipe support est à votre disposition pour vous aider à trouver le document dont vous avez besoin.
