How to connect HomeWizard with Peblar EV chargers

Installing the HomeWizard into your home’s smart meter and pairing it to a Peblar EV charger couldn’t be simpler.

We advise having a qualified installer to set up the HomeWizard and ensure they follow these instructions.

For customers new to HomeWizard

• Place the WiFi P1 Meter in the P1 port of your smart meter. If your smart meter isn’t SMR5, you will need to buy a power adapter set from the HomeWizard shop, if you have a SMR2 smart meter you can not perform load balancing but only solar charging. See an overview in the table below.

• The P1 Meter should start flashing white, indicating it’s in factory mode

• To pair the devices, press and hold the button on the P1 Meter until it starts flashing blue

• Once the HomeWizard P1 Meter has been set up, follow the next steps to connect it to your Peblar EV charger.

Overview of different types of smart meters and capabilities with HomeWizard and Peblar. For more details, check out HomeWizard’s advice for installing the WiFi P1 Meter.

For customers already using HomeWizard

• Connect the Peblar to your home network where the HomeWizard is already connected. This can be done via Ethernet or WiFi

• Select HomeWizard as the source at the dynamic load balancing step during commissioning

• The EV charger will now search for the HomeWizard within the network. Make sure to select the HomeWizard.

How to install the Wi-Fi P1 Meter | HomeWizard Helpdesk

Setting up dynamic load balancing for Peblar with HomeWizard

During the commissioning process, the installation procedure involves selecting the measurement source for dynamic load balancing. First, set your household limit. If HomeWizard is selected, you simply need to choose the matching source.

How does the algorithm work?

The installer is able to verify the correctness of the load balancing by observing the values of the measurement source in the web interface.