In our web interface there are different tabs where you can see and/or change settings
Home
- Observe the session status
- Observe error or warning codes
- Navigating through the charging history per week/month/year
Smart charging
- Change the charging current with a slider, such that the Peblar charger will not exceed the chosen current
- Set-up scheduled charging, such the Peblar charger will only charge at specific times of the day
- Choose an appropriate solar charging strategy, e.g. Fast solar, Smart solar or Pure solar. If you want to know more about these solar strategies, please read our blog
General
- Adjust the LED brightness and buzzer volume
Authorisation
- In managed mode, your charger is connected to a back office. If you want to change authorisation settings, you can contact your installer or back office provider
- In unmanaged mode, you will be able to add/remove unique RFID tags that can be used to start- and stop charging sessions
Installation
- Observe the configured installation parameters
Network
- Connect with available WiFi, Ethernet, Cellular networks
- Enable/Disable the WiFi hotspot of the Peblar charger
System
- Find relevant product information, e.g. the product and serial number, firmware version and energy meter firmware version
- Perform firmware updates (read the How To article)
- Download diagnostics and real-time diagnostics insights (e.g., measured values for load balancing)
- Reboot, factory reset or recommission the charger
Account
- Change the password for logging in to the web interface
Changing the language of the web interface
- This is possible at every page at the top right corner
When you want to change settings that are read-only (for example, connecting to a back office or installation configurations), the charger needs to be recommissioned. Please contact your installer to do this.